3 things to know about home plumbing systems

What are the most important things homeowners should know about their plumbing system?

The plumbing system of a home is not much different than the engine in your car or truck. It will work very well as designed if it is kept up with regular maintenance. Drains that work properly in removing day-to-day waste can become slow and eventually stop up. This could possibly cause considerable damage to a home. What most homeowners don’t know is that the majority of what is washed down the drain contains a petroleum-based product, [such as]shampoos, conditioners, laundry detergents or liquid hand soaps. When these items go down the drain, the interior of the home’s drain lines develops an oily skim. This eventually builds up and catches things like food particles, hair and several other small items. 

What advice do you have for homeowners who go through a natural disaster, like Hurricane Harvey, and have issues with plumbing?

First, know where your home’s main sewer line clean out is located. With the rains we had with Harvey, even our city’s main sewer lines had drainage challenges. During or shortly after Harvey, sewer lines were backing up into the home. The less attractive but immediate way to stop this backup in the home is to open the cleanout and allow the backup to occur outside and not in the home. Also, after a storm like Harvey and your yard starts to dry out, watch for excessive moisture in spots in the yard. This may be sign that your home’s main sewer line has lifted in areas and pulled apart at areas where fittings were used.

What are the most common issues with plumbing, and can they be avoided?

Use your drains for what they were intended to be used for: waste and cleaning water. Do not use oil, paint, plaster or flour. Use an environmentally friendly drain-maintenance product as directed and keep your drain lines as clean and as free from oil-type products. Many of our areas also have hard water, [which]has a tendency to wear our fixtures out quicker than they may be designed. It may take a few years, but eventually the [equipment]will go bad and then leaks start. If you really want a full fix, install a water softener.

Plumbing Emergency Tips

Before calling you emergency local plumber try this tricks.

  • Always know where the main water shut-off valve is located in case of a leak.
  • Know how to turn off the water heater. If it’s a gas water heater, turn the switch to the “pilot” position.
  • Isolation valves located at each fixture will stop the flow of water to that location. This allows water to continue to service the remainder of the house while the leak is being repaired. It’s a good idea to turn on and off each isolation valve in the house at least once a year to keep them in good working condition.
  • Using two wrenches at once turning in opposite directions is called “backing off” and allows the wrench to absorb the stress and not the plumbing.
  • Slip joint pliers can be used to loosen the collar nuts on a drain line.
  • If a supply tube break off is causing a leak, screw in a blind cap to seal off the leak until it can be fixed.
  • Occasionally, the ferrules in a supply tube can get scratched or dented causing water to leak. Use Teflon tape around the ferrule until a permanent repair can be made.
  • Use duct tape or pipe sealing tape to pull together a crack in a pipe, reducing the leak as a temporary solution.
  • A cup plunger can be used for small drains like bath tubs, showers and lavatory sinks. Forced cup plungers have a funnel that can apply extra force down the drain, which is good for sinks or toilets.
  • When unclogging a kitchen sink, use a second plunger to cover the other drain to get the most force to remove the clog.
  • To unclog a toilet, use a forced cup plunger.
  • For bathtub clogs, unscrew the chrome cap — this exposes the entire drain. Once the mechanism is removed, you’ll be able to see the clog. Put the plunger on the drain, and then use the second plunger to plug up the tub’s overflow. Plunge the drain to remove the clog.
    Allen wrenches are useful for working on a faucet and garbage disposals.

How to detect water leaks?

Think like a detective… right!

Turn off all household faucets and, if the meter keeps turning, call a professional to detect the fault.

Another way to discover water leaks is to check the water bill: if consumption has increased for no apparent reason, you have a clear indication that something is wrong.

Watch out! A small leak in the cistern can waste about 2,000 litres of water a year. But unlike a leaking faucet, it is harder to detect.

A trick to these breakdowns is to deposit some dye (food, for example) in the tank and look for the traces of it in the cup, a sign that there is a leak.

Reparalia’s home professionals teach you how to save water and money, checking your facilities with the advice of our professional plumbers. Detect breakdowns and leaks, learn how to react to them, and don’t forget our tricks to save water and do a favor to the Environment… and your pocket;)

To solve it, ask for the help of a specialist.

It is also advisable to regularly check pipes, sink and other plumbing facilities for leaks at least once a year.

In the case of appliances such as freezers, dishwashers, heaters and washing machines, these have rubber caps or washers that weaken over time, check and replace them, making sure they are securely fastened.

Also check the water pressure, as a high pressure in the installation can cause damage or noise in the pipes. When the three bars are exceeded, the water comes out so strongly that it can cause leaks and even break the taps.

To avoid these situations, it is advisable to use pressure reducers, valves that stabilize this parameter inside the home.

How to unblock the shower with eco-friendly and low-cost tricks

The professionals of Reparalia’s home, experts in repairs of all kinds of breakdowns of plumbing, electricity, masonry, locksmithery, household appliances and up to more than twenty guilds, bring you ideas, tips and tricks for a perfect maintenance of your home for little money and with great skill.

They are universal truths, impepinable. That’s why today you’re going to learn a magic formula to save on annoyances, plumbers, and environmental pains. Besides having your shower I’d like to see your mother so clean and so tidy.

How do you avoid getting stuck in your shower head or tub?
Lime and other sediments are inexorably accumulating inside the artichoke. You will notice this because the water gradually stops flowing out evenly, and the jets begin to collect strange diagonals.

It’s time to operate. And, by the way, do it with sense and sensitivity. With skill. And without products and pollutants, unnecessary and much more expensive.

The homemade remedy we recommend is to boil one part of vinegar for every two parts of water, adding to the mixture a good splash of lemon juice.The professionals of Reparalia’s home, experts in repairs of all kinds of breakdowns of plumbing, electricity, masonry, locksmithery, household appliances and up to more than twenty guilds, bring you ideas, tips and tricks for a perfect maintenance of your home for little money and with great skill.

Very hot, we will introduce the artichoke into the solution. If it’s plastic, let it drop a few degrees before the dive. To make it work, leave it there in no less than a quarter of an hour, which you can take advantage of to watch these fantastic videos.

No, I’m not saying that because we made them ourselves.

And how to avoid clogging the drain?
Soap scraps are largely to blame for the so-called “slow pipes”. The precise terminology applicable is “dirty pipes”. And a wire can help with the thickest part of the problem.

Next, prepare this mixture: 250 grams of sodium bicarbonate, 250 grams of fat salt, and 25 centilitres of white vinegar. Nice and warm, and to the hole.

The professionals of Reparalia’s home, experts in repairs of all kinds of breakdowns of plumbing, electricity, masonry, locksmithery, household appliances and up to more than twenty guilds, bring you ideas, tips and tricks for a perfect maintenance of your home for little money and with great skill.

If the jam is so bad that these household tricks don’t work, you can’t help but call a plumber to fix your problem. Does a professional do that to you in no time? 9

And so, as happy with your shower as new, you take a look at these 8 amazing outdoor furniture to be the envy of the neighborhood, and already happiness passes to Nirvana level.

 

How to choose the faucet that best suits your bathroom

Remember when a faucet was made up of two separate controls to control the flow of hot and cold water, and you needed the patience of a watchmaker to use it?

Luckily, nowadays there is an almost infinite number and variety of faucet models, with all kinds of possibilities, accessories and extras.

Technology has entered this important and often overlooked point of our homes and lives, with solutions such as the incorporation of variable LED light at the outlet of the water jet so that we can see its temperature with our own eyes before touching it.

But, today I want to review the different types of faucets that you can find on the market and their possibilities to adjust to your domestic taste.

Two-way tap
Classic among the classics, I opened this post with a retrospective mental image with him. It has the advantage, of course, that it allows you to fine-tune the flow rates of hot and cold water, but in exchange for investing more time in its use and, presumably, both hands.

Single-lever tap
Today, the most widespread in homes, has a single control with which we can regulate temperature and flow in a single movement. Some incorporate ingenious mechanisms that touch the fantasy as leverage, and can give your bathroom or kitchen a touch of spectacular design.

A peculiarity is that we must open them with moderation, because in a single stroke it can provide us with the totality of the flow without being necessary (not so with the taps single-lever wheel, which had to turn several times to take to its top).

Another very common error in the operation is to open it in half often, which makes the hot and cold water mix many times without being necessary (the correct thing would be to always open it from the position of cold water, if it is not lukewarmness what we are looking for).

Thermostatic tap
Much more advanced and also more expensive than the previous ones, this faucet allows you to choose the water temperature and flow rate more specifically. In addition, it incorporates stoppers to prevent the water from running too hot without wanting to, making it safer.

It’s not as easy to install or replace as the other models, but it’s worth the investment.

Built-in tap
It is installed directly on the wall, saving space in the stack and gaining in aesthetics. It also requires, on the other hand, a water intake prepared behind it.

Timer taps
They are usually found in public places, and have their flow limited to a specific time to save water (usually a push-button). They are not recommended for home use because of their obvious limitation, unless there are special safety needs, such as older people with a tendency to leave taps and other appliances open or on.

Infrared controlled taps
They have sensors that detect the hands to get started. We also usually find them in public establishments. They have the convenience of being activated directly with use and turned off when removing hands, but also obvious limitations in the choice of flow and temperature.

Foot pedal tap
Unusual in bathrooms, and even more so in some restaurants, they stand out for hygienic reasons, because you don’t need to use your hands to activate them and they are comfortable -and even fun- to use.

There is something common to any faucet model that you can buy in a hardware store, and that is that the cheap is usually expensive. It is better to invest a little more in a quality model that will give you many more hours of use in perfect condition, avoiding premature replacement.

Speaking of faucet installation, here’s one of our videos that will help you replace your bathroom or kitchen faucet yourself (valid for simple models like the single-lever mixer):

And if you want a helping hand from one of our professional plumbers to save time and complications

8 tips to prevent your pipes from freezing and protect your boiler in winter

If you live in cold and humid climates, and your pipes are especially exposed to these harsh weather conditions (as in many low houses, chalets or duplexes), today’s post will be crucial.

Keeping your pipes insulated from low temperatures will guarantee you a quiet and frost-free winter like the freezing of the water they contain, a very common breakdown between December and February whose repair can be very expensive.

What to do to avoid freezing your water pipes?

Tip #1: Stop dripping.
It’s the water, when it freezes, the real danger we’re talking about. That is why it is important that you look for and find solutions to any type of dripping that is occurring in your plumbing system, from taps to sinks, especially those that are closer to the outside or directly outdoors.

Tip #2: Beware of water on the outside.
In the yard and garden, always empty the hoses so that they do not contain water that, when turned into ice, burst them from the inside. In fact, when temperatures are threatening to drop below zero, disconnect them from the external stopcock to prevent them from freezing too, as far as the pipe itself.

If you have a water tank outside, avoid freezing by pouring some glycerin into the tank.

Tip #3: Protect the pipes from unheated water.
The basements and outside parts of the house usually have them, and they are the main candidates to stay stiff and cold and give you more scares.

Isolating these pipes is fundamental, for which there are many thermal tapes and insulating accessories that you should install right now to prevent.

With respect to thermal tapes, there are different types with different materials and functions. Some have an integrated thermostat, which requires the tape to be entangled between the pipe and the insulation. Some thermal tapes do not allow insulation to be placed on them, so it is best to always follow the manufacturer’s instructions.

Tip #4: Water moving against freezing.
When the electrical fluid is unavailable and everything stays at the mercy of the cold, it is better to leave a fine and constant stream of water circulating, whose frictional force will make it harder to freeze the water it contains in the cold.

Tip #5: How to heat a frozen pipe.
First of all, check the state and material we’re talking about.

Some plastics and copper will break if the transition is too abrupt, or simply because they have already cracked with freezing and are waiting to return to a warmer temperature to release all the stored water.

If you notice a broken pipe, call a warranty plumber to take care of it professionally if you want to avoid major problems.

If the tube is made of a sturdy metal, you can heat it by applying a remote welder, dryer or heat lamp. Always do it with great care and slowly, and never leave this process unsupervised.

Tip #6: Use a hot water recirculation valve with thermal convection temperature control.
It sounds Chinese, but it’s a very ingenious device that doesn’t require electricity to operate, and will continuously circulate warm water through the water lines whenever the temperature is below the point you have.

Unlike thermal tape, which only heats the pipes, this process circulates water without interruption to prevent crystallization and freezing, regardless of whether the pipes are hidden.

Keep in mind that this method requires the valve to be installed at a higher level (2nd or 3rd floor) than the water heater. The uninterrupted circulation of water through your system will increase your water heating bill. When you don’t want circulation, uninstall the valve and that’s it.

Tip #7: Place a material called ICE LOC.
It is an elastomer that fits inside pipes in problematic areas and prevents pipes from breaking when absorbing the expansion of frozen water.

Tip #8: line the pipes with grout.
In this post we explain how to do it on video, in addition to giving you some extra valuable tips to avoid having a hard time during this winter that begins.

Share this information with your family and friends who live in colder and more exposed areas.

Local plumber near me

Years of training and/or experience are needed to become a skilled plumber; some jurisdictions also require that plumbers be licensed.

Some needed skills, interests, and values. Protecting health and welfare of the nation is the top priority of a plumber along with,

  • Reading drawings, and specifications to determine layout of water supply, waste, and venting systems
  • Detecting faults in plumbing appliances and systems, and correctly diagnosing their causes
  • Installing, repairing and maintaining domestic, commercial, and industrial plumbing fixtures and systems
  • Locating and marking positions for pipe connections, passage holes, and fixtures in walls and floors
  • Measuring, cutting, bending, and threading pipes using hand and power tools or machines
  • Joining pipes and fittings together using soldering techniques, compression fittings, threaded fittings, and push-on fittings.
  • Testing pipes for leaks using air and water pressure gauges
  • Awareness of legal regulations and safety issues
  • Ensuring safety standards and building regulations are met.
  • Copper Piping
  • Hydronic heating system installation and maintenance.
  • ADA Compliance
  • Potable Water Systems
  • Sanitary Waste & Vent
  • Code Compliance
  • Acid Waste
  • Grease trap interceptors (install)
  • Heating Hot Water
  • Chill Water
  • Backflow Preventers
  • Natural Gas
  • Storm Drains
  • Seismic
  • New Construction
  • Urinals (waterless and standard)
  • Flush Valves
  • Toilet Chair Carriers
  • Floor Drains
  • Floor Clean Outs
  • Combination waste & Vent
  • Floor Sinks